forge install: forge-std

v1.9.2

.babelrc

@@ -1,3 +0,0 @@
-{
-  "presets": ["es2015", "stage-2", "stage-3"]
-}

.changeset/chilled-walls-develop.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Clones`: Add version of `clone` and `cloneDeterministic` that support sending value at creation.

.changeset/chilly-humans-warn.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': patch
+---
+
+`ProxyAdmin`: Fixed documentation for `UPGRADE_INTERFACE_VERSION` getter.

.changeset/cold-cheetahs-check.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`CircularBuffer`: Add a data structure that stores the last `N` values pushed to it.

.changeset/config.json

@@ -0,0 +1,12 @@
+{
+  "$schema": "https://unpkg.com/@changesets/config@2.3.0/schema.json",
+  "changelog": [
+    "@changesets/changelog-github",
+    {
+      "repo": "OpenZeppelin/openzeppelin-contracts"
+    }
+  ],
+  "commit": false,
+  "access": "public",
+  "baseBranch": "master"
+}

.changeset/cool-mangos-compare.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Math`: add an `invMod` function to get the modular multiplicative inverse of a number in Z/nZ.

.changeset/curvy-crabs-repeat.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`RSA`: Library to verify signatures according to RFC 8017 Signature Verification Operation

.changeset/dirty-cobras-smile.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Arrays`: add a `sort` functions for `address[]`, `bytes32[]` and `uint256[]` memory arrays.

.changeset/eight-eyes-burn.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`GovernorCountingFractional`: Add a governor counting module that allows distributing voting power amongst 3 options (For, Against, Abstain).

.changeset/eleven-planets-relax.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': patch
+---
+
+`TransparentUpgradeableProxy`: Make internal `_proxyAdmin()` getter have `view` visibility.

.changeset/flat-turtles-repeat.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Arrays`: deprecate `findUpperBound` in favor of the new `lowerBound`.

.changeset/fluffy-buses-jump.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Comparator`: A library of comparator functions, useful for customizing the behavior of the Heap structure.

.changeset/fluffy-steaks-exist.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': patch
+---
+
+`Create2`, `Clones`: Mask `computeAddress` and `cloneDeterministic` outputs to produce a clean value for an `address` type (i.e. only use 20 bytes)

.changeset/forty-dodos-visit.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Strings`: Added a utility function for converting an address to checksummed string.

.changeset/friendly-nails-push.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`ERC1363`: Add implementation of the token payable standard allowing execution of contract code after transfers and approvals.

.changeset/gentle-bulldogs-turn.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`DoubleEndedQueue`: Custom errors replaced with native panic codes.

.changeset/gorgeous-badgers-vanish.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`SlotDerivation`: Add a library of methods for derivating common storage slots.

.changeset/great-pianos-work.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Heap`: A data structure that implements a heap-based priority queue.

.changeset/heavy-baboons-give.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Packing`: Added a new utility for packing, extracting and replacing bytesXX values.

.changeset/kind-planets-cough.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`StorageSlot`: Add primitives for operating on the transient storage space using a typed-slot representation.

.changeset/light-news-listen.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`AccessManager`: Allow the `onlyAuthorized` modifier to restrict functions added to the manager.

.changeset/lucky-crews-eat.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Votes`: Set `_moveDelegateVotes` visibility to internal instead of private.

.changeset/nervous-eyes-teach.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Create2`: Bubbles up returndata from a deployed contract that reverted during construction.

.changeset/nervous-pans-grow.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': patch
+---
+
+`SafeCast`: Add `toUint(bool)` for operating on `bool` values as `uint256`.

.changeset/nice-paws-pull.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`SafeERC20`: Add "relaxed" function for interacting with ERC-1363 functions in a way that is compatible with EOAs.

.changeset/odd-files-protect.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Hashes`: A library with commonly used hash functions.

.changeset/odd-lobsters-wash.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`P256`: Library for verification and public key recovery of P256 (aka secp256r1) signatures.

.changeset/poor-chefs-cheat.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`ERC721Utils` and `ERC1155Utils`: Add reusable libraries with functions to perform acceptance checks on `IERC721Receiver` and `IERC1155Receiver` implementers.

.changeset/serious-carrots-provide.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`ERC20TemporaryApproval`: Add an ERC-20 extension that implements temporary approval using transient storage, based on ERC7674 (draft).

.changeset/shiny-poets-whisper.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Math`: Add `modExp` function that exposes the `EIP-198` precompile. Includes `uint256` and `bytes memory` versions.

.changeset/silver-swans-promise.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Panic`: Add a library for reverting with panic codes.

.changeset/smart-bugs-switch.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Math`: Custom errors replaced with native panic codes.

.changeset/spotty-falcons-explain.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Math`, `SignedMath`: Add a branchless `ternary` function that computes`cond ? a : b` in constant gas cost.

.changeset/spotty-queens-own.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`MerkleProof`: Add variations of `verify`, `processProof`, `multiProofVerify` and `processMultiProof` (and equivalent calldata version) with support for custom hashing functions.

.changeset/strong-singers-talk.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Errors`: New library of common custom errors.

.changeset/thick-pumpkins-report.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Arrays`: add new functions `lowerBound`, `upperBound`, `lowerBoundMemory` and `upperBoundMemory` for lookups in sorted arrays with potential duplicates.

.changeset/thin-walls-drop.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`AccessManager`, `VestingWallet`, `TimelockController` and `ERC2771Forwarder`: Added a public `initializer` function in their corresponding upgradeable variants.

.changeset/tricky-bats-pretend.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`ERC1363Utils`: Add helper similar to the existing `ERC721Utils` and `ERC1155Utils`

.changeset/twenty-feet-grin.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`Base64`: Add `encodeURL` following section 5 of RFC4648 for URL encoding

.changeset/violet-moons-tell.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`AccessControlEnumerable`: Add a `getRoleMembers` method to return all accounts that have `role`.

.changeset/warm-sheep-cover.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`MerkleTree`: A data structure that allows inserting elements into a merkle tree and updating its root hash.

.changeset/wise-bobcats-speak.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`VestingWalletCliff`: Add an extension of the `VestingWallet` contract with an added cliff.

.changeset/witty-chicken-smile.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`ReentrancyGuardTransient`: Added a variant of `ReentrancyGuard` that uses transient storage.

.changeset/yellow-deers-walk.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`EnumerableMap`: add `UintToBytes32Map`, `AddressToAddressMap`, `AddressToBytes32Map` and `Bytes32ToAddressMap`.

.changeset/yellow-moles-hammer.md

@@ -0,0 +1,5 @@
+---
+'openzeppelin-solidity': minor
+---
+
+`SignatureChecker`: refactor `isValidSignatureNow` to avoid validating ECDSA signatures if there is code deployed at the signer's address.

.codecov.yml

@@ -0,0 +1,15 @@
+comment: off
+github_checks:
+  annotations: false
+coverage:
+  status:
+    patch:
+      default:
+        target: 95%
+        only_pulls: true
+    project:
+      default:
+        threshold: 1%
+ignore:
+  - "test"
+  - "contracts/mocks"

.editorconfig

@@ -0,0 +1,21 @@
+# EditorConfig is awesome: https://EditorConfig.org
+
+# top-most EditorConfig file
+root = true
+
+[*]
+charset = utf-8
+end_of_line = lf
+indent_style = space
+insert_final_newline = true
+trim_trailing_whitespace = false
+max_line_length = 120
+
+[*.sol]
+indent_size = 4
+
+[*.js]
+indent_size = 2
+
+[*.{adoc,md}]
+max_line_length = 0

.eslintrc

@@ -0,0 +1,20 @@
+{
+  "root": true,
+  "extends" : [
+    "eslint:recommended",
+    "prettier",
+  ],
+  "env": {
+    "es2022": true,
+    "browser": true,
+    "node": true,
+    "mocha": true,
+  },
+  "globals" : {
+    "artifacts": "readonly",
+    "contract": "readonly",
+    "web3": "readonly",
+    "extendEnvironment": "readonly",
+    "expect": "readonly",
+  }
+}

.githooks/pre-push

@@ -0,0 +1,8 @@
+#!/usr/bin/env bash
+
+set -euo pipefail
+
+if [ "${CI:-"false"}" != "true" ]; then
+  npm run test:generation
+  npm run lint
+fi

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,21 @@
+---
+name: Bug report
+about: Report a bug in OpenZeppelin Contracts
+
+---
+
+<!-- Briefly describe the issue you're experiencing. Tell us what you were trying to do and what happened instead. -->
+
+<!-- Remember, this is not a place to ask for help debugging code. For that, we welcome you in the OpenZeppelin Community Forum: https://forum.openzeppelin.com/. -->
+
+**💻 Environment**
+
+<!-- Tell us what version of OpenZeppelin Contracts you're using, and how you're using it: Hardhat, Remix, etc. -->
+
+**📝 Details**
+
+<!-- Describe the problem you have been experiencing in more detail. Include as much information as you think is relevant. Keep in mind that transactions can fail for many reasons; context is key here. -->
+
+**🔢 Code to reproduce bug**
+
+<!-- We will be able to better help if you provide a minimal example that triggers the bug. -->

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,4 @@
+contact_links:
+  - name: Questions & Support Requests
+    url: https://forum.openzeppelin.com/c/support/contracts/18
+    about: Ask in the OpenZeppelin Forum

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,14 @@
+---
+name: Feature request
+about: Suggest an idea for OpenZeppelin Contracts
+
+---
+
+**🧐 Motivation**
+<!-- Is your feature request related to a specific problem? Is it just a crazy idea? Tell us about it! -->
+
+**📝 Details**
+<!-- Please describe your feature request in detail. -->
+
+<!-- Make sure that you have reviewed the OpenZeppelin Contracts Contributor Guidelines. -->
+<!-- https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/CONTRIBUTING.md -->

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1,20 @@
+<!-- Thank you for your interest in contributing to OpenZeppelin! -->
+
+<!-- Consider opening an issue for discussion prior to submitting a PR. -->
+<!-- New features will be merged faster if they were first discussed and designed with the team. -->
+
+Fixes #???? <!-- Fill in with issue number -->
+
+<!-- Describe the changes introduced in this pull request. -->
+<!-- Include any context necessary for understanding the PR's purpose. -->
+
+
+#### PR Checklist
+
+<!-- Before merging the pull request all of the following must be complete. -->
+<!-- Feel free to submit a PR or Draft PR even if some items are pending. -->
+<!-- Some of the items may not apply. -->
+
+- [ ] Tests
+- [ ] Documentation
+- [ ] Changeset entry (run `npx changeset add`)

.github/actions/gas-compare/action.yml

@@ -0,0 +1,50 @@
+name: Compare gas costs
+description: Compare gas costs between branches
+inputs:
+  token:
+    description: github token
+    required: true
+  report:
+    description: report to read from
+    required: false
+    default: gasReporterOutput.json
+  out_report:
+    description: report to read
+    required: false
+    default: ${{ github.ref_name }}.gasreport.json
+  ref_report:
+    description: report to read from
+    required: false
+    default: ${{ github.base_ref }}.gasreport.json
+
+runs:
+  using: composite
+  steps:
+    - name: Download reference report
+      if: github.event_name == 'pull_request'
+      run: |
+        RUN_ID=`gh run list --repo ${{ github.repository }} --branch ${{ github.base_ref }} --workflow ${{ github.workflow }} --limit 100 --json 'conclusion,databaseId,event' --jq 'map(select(.conclusion=="success" and .event!="pull_request"))[0].databaseId'`
+        gh run download ${RUN_ID} --repo ${{ github.repository }} -n gasreport
+      env:
+        GITHUB_TOKEN: ${{ inputs.token }}
+      shell: bash
+      continue-on-error: true
+      id: reference
+    - name: Compare reports
+      if: steps.reference.outcome == 'success' && github.event_name == 'pull_request'
+      run: |
+        node scripts/checks/compareGasReports.js ${{ inputs.report }} ${{ inputs.ref_report }} >> $GITHUB_STEP_SUMMARY
+      env:
+        STYLE: markdown
+      shell: bash
+    - name: Rename report for upload
+      if: github.event_name != 'pull_request'
+      run: |
+        mv ${{ inputs.report }} ${{ inputs.out_report }}
+      shell: bash
+    - name: Save report
+      if: github.event_name != 'pull_request'
+      uses: actions/upload-artifact@v3
+      with:
+        name: gasreport
+        path: ${{ inputs.out_report }}

.github/actions/setup/action.yml

@@ -0,0 +1,22 @@
+name: Setup
+description: Common environment setup
+
+runs:
+  using: composite
+  steps:
+    - uses: actions/setup-node@v4
+      with:
+        node-version: 20.x
+    - uses: actions/cache@v4
+      id: cache
+      with:
+        path: '**/node_modules'
+        key: npm-v3-${{ hashFiles('**/package-lock.json') }}
+    - name: Install dependencies
+      run: npm ci
+      shell: bash
+      if: steps.cache.outputs.cache-hit != 'true'
+    - name: Install Foundry
+      uses: foundry-rs/foundry-toolchain@v1
+      with:
+        version: nightly

.github/actions/storage-layout/action.yml

@@ -0,0 +1,56 @@
+name: Compare storage layouts
+description: Compare storage layouts between branches
+inputs:
+  token:
+    description: github token
+    required: true
+  buildinfo:
+    description: compilation artifacts
+    required: false
+    default: artifacts/build-info/*.json
+  layout:
+    description: extracted storage layout
+    required: false
+    default: HEAD.layout.json
+  out_layout:
+    description: storage layout to upload
+    required: false
+    default: ${{ github.ref_name }}.layout.json
+  ref_layout:
+    description: storage layout for the reference branch
+    required: false
+    default: ${{ github.base_ref }}.layout.json
+
+runs:
+  using: composite
+  steps:
+    - name: Extract layout
+      run: |
+        node scripts/checks/extract-layout.js ${{ inputs.buildinfo }} > ${{ inputs.layout }}
+      shell: bash
+    - name: Download reference
+      if: github.event_name == 'pull_request'
+      run: |
+        RUN_ID=`gh run list --repo ${{ github.repository }} --branch ${{ github.base_ref }} --workflow ${{ github.workflow }} --limit 100 --json 'conclusion,databaseId,event' --jq 'map(select(.conclusion=="success" and .event!="pull_request"))[0].databaseId'`
+        gh run download ${RUN_ID} --repo ${{ github.repository }} -n layout
+      env:
+        GITHUB_TOKEN: ${{ inputs.token }}
+      shell: bash
+      continue-on-error: true
+      id: reference
+    - name: Compare layouts
+      if: steps.reference.outcome == 'success' && github.event_name == 'pull_request'
+      run: |
+        node scripts/checks/compare-layout.js --head ${{ inputs.layout }} --ref ${{ inputs.ref_layout }}
+      shell: bash
+    - name: Rename artifacts for upload
+      if: github.event_name != 'pull_request'
+      run: |
+        mv ${{ inputs.layout }} ${{ inputs.out_layout }}
+      shell: bash
+    - name: Save artifacts
+      if: github.event_name != 'pull_request'
+      uses: actions/upload-artifact@v3
+      with:
+        name: layout
+        path: ${{ inputs.out_layout }}

.github/workflows/actionlint.yml

@@ -0,0 +1,18 @@
+name: lint workflows
+
+on:
+  pull_request:
+    paths:
+      - '.github/**/*.ya?ml'
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Add problem matchers
+        run: |
+          # https://github.com/rhysd/actionlint/blob/3a2f2c7/docs/usage.md#problem-matchers
+          curl -LO https://raw.githubusercontent.com/rhysd/actionlint/main/.github/actionlint-matcher.json
+          echo "::add-matcher::actionlint-matcher.json"
+      - uses: docker://rhysd/actionlint:latest

.github/workflows/changeset.yml

@@ -0,0 +1,28 @@
+name: changeset
+
+on:
+  pull_request:
+    branches:
+      - master
+    types:
+      - opened
+      - synchronize
+      - labeled
+      - unlabeled
+
+concurrency:
+  group: changeset-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  check:
+    runs-on: ubuntu-latest
+    if: ${{ !contains(github.event.pull_request.labels.*.name, 'ignore-changeset') }}
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0 # Include history so Changesets finds merge-base
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Check changeset
+        run: npx changeset status --since=origin/${{ github.base_ref }}

.github/workflows/checks.yml

@@ -0,0 +1,132 @@
+name: checks
+
+on:
+  push:
+    branches:
+      - master
+      - next-v*
+      - release-v*
+  pull_request: {}
+  workflow_dispatch: {}
+
+concurrency:
+  group: checks-${{ github.ref }}
+  cancel-in-progress: true
+
+env:
+  NODE_OPTIONS: --max_old_space_size=8192
+
+jobs:
+  lint:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - run: npm run lint
+
+  tests:
+    runs-on: ubuntu-latest
+    env:
+      FORCE_COLOR: 1
+      # Needed for "eth-gas-reporter" to produce a "gasReporterOutput.json" as documented in
+      # https://github.com/cgewecke/eth-gas-reporter/blob/v0.2.27/docs/gasReporterOutput.md
+      CI: true
+      GAS: true
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Run tests and generate gas report
+        run: npm run test
+      - name: Check linearisation of the inheritance graph
+        run: npm run test:inheritance
+      - name: Check proceduraly generated contracts are up-to-date
+        run: npm run test:generation
+      - name: Compare gas costs
+        uses: ./.github/actions/gas-compare
+        with:
+          token: ${{ github.token }}
+
+  tests-upgradeable:
+    runs-on: ubuntu-latest
+    env:
+      FORCE_COLOR: 1
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0 # Include history so patch conflicts are resolved automatically
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Copy non-upgradeable contracts as dependency
+        run: |
+          mkdir -p lib/openzeppelin-contracts
+          cp -rnT contracts lib/openzeppelin-contracts/contracts
+      - name: Transpile to upgradeable
+        run: bash scripts/upgradeable/transpile.sh
+      - name: Run tests
+        run: npm run test
+      - name: Check linearisation of the inheritance graph
+        run: npm run test:inheritance
+      - name: Check storage layout
+        uses: ./.github/actions/storage-layout
+        continue-on-error: ${{ contains(github.event.pull_request.labels.*.name, 'breaking change') }}
+        with:
+          token: ${{ github.token }}
+
+  tests-foundry:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          submodules: recursive
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Run tests
+        run: forge test -vv
+
+  coverage:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Run coverage
+        run: npm run coverage
+      - uses: codecov/codecov-action@v4
+        env:
+          CODECOV_TOKEN: ${{ secrets.CODECOV_TOKEN }}
+
+  harnesses:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Compile harnesses
+        run: |
+          make -C certora apply
+          npm run compile:harnesses
+
+  slither:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - run: rm foundry.toml
+      - uses: crytic/slither-action@v0.4.0
+        with:
+          node-version: 18.15
+          slither-version: 0.10.1
+
+  codespell:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Run CodeSpell
+        uses: codespell-project/actions-codespell@v2.1
+        with:
+          check_hidden: true
+          check_filenames: true
+          skip: package-lock.json,*.pdf

.github/workflows/docs.yml

@@ -0,0 +1,19 @@
+name: Build Docs
+
+on:
+  push:
+    branches: [release-v*]
+
+permissions:
+  contents: write
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - run: bash scripts/git-user-config.sh
+      - run: node scripts/update-docs-branch.js
+      - run: git push --all origin 

.github/workflows/formal-verification.yml

@@ -0,0 +1,86 @@
+name: formal verification
+
+on:
+  pull_request:
+    types:
+      - opened
+      - reopened
+      - synchronize
+      - labeled
+  workflow_dispatch: {}
+
+env:
+  PIP_VERSION: '3.11'
+  JAVA_VERSION: '11'
+  SOLC_VERSION: '0.8.20'
+
+concurrency: ${{ github.workflow }}-${{ github.ref }}
+
+jobs:
+  apply-diff:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Apply patches
+        run: make -C certora apply
+
+  verify:
+    runs-on: ubuntu-latest
+    if: github.event_name != 'pull_request' || contains(github.event.pull_request.labels.*.name, 'formal-verification')
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: identify specs that need to be run
+        id: arguments
+        run: |
+          if [[ ${{ github.event_name }} = 'pull_request' ]];
+          then
+            RESULT=$(git diff ${{ github.event.pull_request.head.sha }}..${{ github.event.pull_request.base.sha }} --name-only certora/specs/*.spec | while IFS= read -r file; do [[ -f $file ]] && basename "${file%.spec}"; done | tr "\n" " ")
+          else
+            RESULT='--all'
+          fi
+          echo "result=$RESULT" >> "$GITHUB_OUTPUT"
+      - name: Install python
+        uses: actions/setup-python@v5
+        with:
+          python-version: ${{ env.PIP_VERSION }}
+          cache: 'pip'
+          cache-dependency-path: 'fv-requirements.txt'
+      - name: Install python packages
+        run: pip install -r fv-requirements.txt
+      - name: Install java
+        uses: actions/setup-java@v3
+        with:
+          distribution: temurin
+          java-version: ${{ env.JAVA_VERSION }}
+      - name: Install solc
+        run: |
+          wget https://github.com/ethereum/solidity/releases/download/v${{ env.SOLC_VERSION }}/solc-static-linux
+          sudo mv solc-static-linux /usr/local/bin/solc
+          chmod +x /usr/local/bin/solc
+      - name: Verify specification
+        run: |
+          make -C certora apply
+          node certora/run.js ${{ steps.arguments.outputs.result }} >> "$GITHUB_STEP_SUMMARY"
+        env:
+          CERTORAKEY: ${{ secrets.CERTORAKEY }}
+
+  halmos:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Install python
+        uses: actions/setup-python@v5
+        with:
+          python-version: ${{ env.PIP_VERSION }}
+          cache: 'pip'
+          cache-dependency-path: 'fv-requirements.txt'
+      - name: Install python packages
+        run: pip install -r fv-requirements.txt
+      - name: Run Halmos
+        run: halmos --match-test '^symbolic|^testSymbolic' -vv

.github/workflows/release-cycle.yml

@@ -0,0 +1,212 @@
+#  D: Manual Dispatch
+#  M: Merge release PR
+#  C: Commit
+#  ┌───────────┐     ┌─────────────┐     ┌────────────────┐
+#  │Development├──D──►RC-Unreleased│  ┌──►Final-Unreleased│
+#  └───────────┘     └─┬─────────▲─┘  │  └─┬────────────▲─┘
+#                      │         │    │    │            │
+#                      M         C    D    M            C
+#                      │         │    │    │            │
+#                     ┌▼─────────┴┐   │   ┌▼────────────┴┐
+#                     │RC-Released├───┘   │Final-Released│
+#                     └───────────┘       └──────────────┘
+name: Release Cycle
+
+on:
+  push:
+    branches:
+      - release-v*
+  workflow_dispatch: {}
+
+concurrency: ${{ github.workflow }}-${{ github.ref }}
+
+jobs:
+  state:
+    name: Check state
+    permissions:
+      pull-requests: read
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - id: state
+        name: Get state
+        uses: actions/github-script@v7
+        env:
+          TRIGGERING_ACTOR: ${{ github.triggering_actor }}
+        with:
+          result-encoding: string
+          script: await require('./scripts/release/workflow/state.js')({ github, context, core })
+    outputs:
+      # Job Flags
+      start: ${{ steps.state.outputs.start }}
+      changesets: ${{ steps.state.outputs.changesets }}
+      promote: ${{ steps.state.outputs.promote }}
+      publish: ${{ steps.state.outputs.publish }}
+      merge: ${{ steps.state.outputs.merge }}
+
+      # Global variables
+      is_prerelease: ${{ steps.state.outputs.is_prerelease }}
+
+  start:
+    needs: state
+    name: Start new release candidate
+    permissions:
+      contents: write
+      actions: write
+    if: needs.state.outputs.start == 'true'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - run: bash scripts/git-user-config.sh
+      - id: start
+        name: Create branch with release candidate
+        run: bash scripts/release/workflow/start.sh
+      - name: Re-run workflow
+        uses: actions/github-script@v7
+        env:
+          REF: ${{ steps.start.outputs.branch }}
+        with:
+          script: await require('./scripts/release/workflow/rerun.js')({ github, context })
+
+  promote:
+    needs: state
+    name: Promote to final release
+    permissions:
+      contents: write
+      actions: write
+    if: needs.state.outputs.promote == 'true'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - run: bash scripts/git-user-config.sh
+      - name: Exit prerelease state
+        if: needs.state.outputs.is_prerelease == 'true'
+        run: bash scripts/release/workflow/exit-prerelease.sh
+      - name: Re-run workflow
+        uses: actions/github-script@v7
+        with:
+          script: await require('./scripts/release/workflow/rerun.js')({ github, context })
+
+  changesets:
+    needs: state
+    name: Update PR to release
+    permissions:
+      contents: write
+      pull-requests: write
+    if: needs.state.outputs.changesets == 'true'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0 # To get all tags
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - name: Set release title
+        uses: actions/github-script@v7
+        with:
+          result-encoding: string
+          script: await require('./scripts/release/workflow/set-changesets-pr-title.js')({ core })
+      - name: Create PR
+        uses: changesets/action@v1
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          PRERELEASE: ${{ needs.state.outputs.is_prerelease }}
+        with:
+          version: npm run version
+          title: ${{ env.TITLE }}
+          commit: ${{ env.TITLE }}
+          body: | # Wait for support on this https://github.com/changesets/action/pull/250
+            This is an automated PR for releasing ${{ github.repository }}
+            Check [CHANGELOG.md](${{ github.repository }}/CHANGELOG.md)
+
+  publish:
+    needs: state
+    name: Publish to npm
+    environment: npm
+    permissions:
+      contents: write
+    if: needs.state.outputs.publish == 'true'
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - id: pack
+        name: Pack
+        run: bash scripts/release/workflow/pack.sh
+        env:
+          PRERELEASE: ${{ needs.state.outputs.is_prerelease }}
+      - name: Upload tarball artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: ${{ github.ref_name }}
+          path: ${{ steps.pack.outputs.tarball }}
+      - name: Publish
+        run: bash scripts/release/workflow/publish.sh
+        env:
+          NPM_TOKEN: ${{ secrets.NPM_TOKEN }}
+          TARBALL: ${{ steps.pack.outputs.tarball }}
+          TAG: ${{ steps.pack.outputs.tag }}
+      - name: Create Github Release
+        uses: actions/github-script@v7
+        env:
+          PRERELEASE: ${{ needs.state.outputs.is_prerelease }}
+        with:
+          script: await require('./scripts/release/workflow/github-release.js')({ github, context })
+    outputs:
+      tarball_name: ${{ steps.pack.outputs.tarball_name }}
+
+  integrity_check:
+    needs: publish
+    name: Tarball Integrity Check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Download tarball artifact
+        id: artifact
+        uses: actions/download-artifact@v4
+        with:
+          name: ${{ github.ref_name }}
+      - name: Check integrity
+        run: bash scripts/release/workflow/integrity-check.sh
+        env:
+          TARBALL: ${{ steps.artifact.outputs.download-path }}/${{ needs.publish.outputs.tarball_name }}
+
+  merge:
+    needs: state
+    name: Create PR back to master
+    permissions:
+      contents: write
+      pull-requests: write
+    if: needs.state.outputs.merge == 'true'
+    runs-on: ubuntu-latest
+    env:
+      MERGE_BRANCH: merge/${{ github.ref_name }}
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0 # All branches
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - run: bash scripts/git-user-config.sh
+      - name: Create branch to merge
+        run: |
+          git checkout -B "$MERGE_BRANCH" "$GITHUB_REF_NAME"
+          git push -f origin "$MERGE_BRANCH"
+      - name: Create PR back to master
+        uses: actions/github-script@v7
+        with:
+          script: |
+            await github.rest.pulls.create({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              head: process.env.MERGE_BRANCH,
+              base: 'master',
+              title: '${{ format('Merge {0} branch', github.ref_name) }}'
+            });

.github/workflows/upgradeable.yml

@@ -0,0 +1,34 @@
+name: transpile upgradeable
+
+on:
+  push:
+    branches:
+      - master
+      - release-v*
+
+jobs:
+  transpile:
+    environment: push-upgradeable
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          repository: OpenZeppelin/openzeppelin-contracts-upgradeable
+          fetch-depth: 0
+          token: ${{ secrets.GH_TOKEN_UPGRADEABLE }}
+      - name: Fetch current non-upgradeable branch
+        run: |
+          git fetch "$REMOTE" master # Fetch default branch first for patch to apply cleanly
+          git fetch "$REMOTE" "$REF"
+          git checkout FETCH_HEAD
+        env:
+          REF: ${{ github.ref }}
+          REMOTE: https://github.com/${{ github.repository }}.git
+      - name: Set up environment
+        uses: ./.github/actions/setup
+      - run: bash scripts/git-user-config.sh
+      - name: Transpile to upgradeable
+        run: bash scripts/upgradeable/transpile-onto.sh ${{ github.ref_name }} origin/${{ github.ref_name }}
+        env:
+          SUBMODULE_REMOTE: https://github.com/${{ github.repository }}.git
+      - run: git push origin ${{ github.ref_name }}

.gitignore

@@ -1,9 +1,66 @@
 *.swp
 *.swo
-node_modules/
-build/
-.DS_Store/
-/coverage
-coverage.json
+
+# Logs
+logs
+*.log
+
+# Runtime data
+pids
+*.pid
+*.seed
 allFiredEvents
 scTopics
+
+# Coverage directory used by tools like istanbul
+coverage
+coverage.json
+coverageEnv
+
+# node-waf configuration
+.lock-wscript
+
+# Dependency directory
+node_modules
+
+# Debug log from npm
+npm-debug.log
+
+# local env variables
+.env
+
+# macOS
+.DS_Store
+
+# IntelliJ IDE
+.idea
+
+# docs artifacts
+docs/modules/api
+
+# only used to package @openzeppelin/contracts
+contracts/build/
+contracts/README.md
+
+# temporary artifact from solidity-coverage
+allFiredEvents
+.coverage_artifacts
+.coverage_cache
+.coverage_contracts
+
+# hardat-exposed
+contracts-exposed
+
+# Hardhat
+/cache
+/artifacts
+
+# Foundry
+/out
+/cache_forge
+
+# Certora
+.certora*
+.last_confs
+certora_*
+.zip-output-url.txt

.gitmodules

@@ -0,0 +1,9 @@
+[submodule "lib/erc4626-tests"]
+	path = lib/erc4626-tests
+	url = https://github.com/a16z/erc4626-tests.git
+[submodule "lib/halmos-cheatcodes"]
+	path = lib/halmos-cheatcodes
+	url = https://github.com/a16z/halmos-cheatcodes
+[submodule "lib/forge-std"]
+	path = lib/forge-std
+	url = https://github.com/foundry-rs/forge-std

.jshintrc

@@ -1,48 +0,0 @@
-{
-    "bitwise": false,     // Prohibit bitwise operators (&, |, ^, etc.).
-    "browser": true,      // Standard browser globals e.g. `window`, `document`.
-    "camelcase": false,   // Permit only camelcase for `var` and `object indexes`.
-    "curly": true,        // Require {} for every new block or scope.
-    "devel": false,       // Allow development statements e.g. `console.log();`.
-    "eqeqeq": true,       // Require triple equals i.e. `===`.
-    "esnext": true,       // Allow ES.next specific features such as `const` and `let`.
-    "freeze": true,       // Forbid overwriting prototypes of native objects such as Array, Date and so on.
-    "immed": true,        // Require immediate invocations to be wrapped in parens e.g. `( function(){}() );`
-    "indent": 2,          // Specify indentation spacing
-    "latedef": true,      // Prohibit variable use before definition.
-    "newcap": false,      // Require capitalization of all constructor functions e.g. `new F()`.
-    "noarg": true,        // Prohibit use of `arguments.caller` and `arguments.callee`.
-    "node": true,         // Enable globals available when code is running inside of the NodeJS runtime environment.
-    "noempty": true,      // Prohibit use of empty blocks.
-    "nonew": true,        // Prohibits the use of constructor functions for side-effects
-    "quotmark": "single", // Define quotes to string values.
-    "regexp": true,       // Prohibit `.` and `[^...]` in regular expressions.
-    "smarttabs": false,   // Supress warnings about mixed tabs and spaces
-    "strict": true,       // Require `use strict` pragma in every file.
-    "trailing": true,     // Prohibit trailing whitespaces.
-    "undef": true,        // Require all non-global variables be declared before they are used.
-    "unused": true,       // Warn unused variables.
-
-    "maxparams": 4,       // Maximum number of parameters for a function
-    "maxstatements": 15,  // Maximum number of statements in a function
-    "maxcomplexity": 10,  // Cyclomatic complexity (http://en.wikipedia.org/wiki/Cyclomatic_complexity)
-    "maxdepth": 4,        // Maximum depth of nested control structures
-    "maxlen": 120,        // Maximum number of cols in a line
-    "multistr": true,     // Allow use of multiline EOL escaping
-    "experimental": ["asyncawait", "asyncreqawait"],
-
-    "predef": [ // Extra globals.
-        "after",
-        "afterEach",
-        "before",
-        "beforeEach",
-        "define",
-        "describe",
-        "exports",
-        "it",
-        "web3",
-        "artifacts",
-        "contract",
-        "assert"
-    ]
-}

.mocharc.js

@@ -0,0 +1,4 @@
+module.exports = {
+  require: 'hardhat/register',
+  timeout: 4000,
+};

.prettierrc

@@ -0,0 +1,15 @@
+{
+  "printWidth": 120,
+  "singleQuote": true,
+  "trailingComma": "all",
+  "arrowParens": "avoid",
+  "overrides": [
+    {
+      "files": "*.sol",
+      "options": {
+        "singleQuote": false
+      }
+    }
+  ],
+  "plugins": ["prettier-plugin-solidity"]
+}

.solcover.js

@@ -1,5 +1,13 @@
 module.exports = {
-    norpc: true,
-    testCommand: 'node --max-old-space-size=4096 ../node_modules/.bin/truffle test --network coverage',
-    skipFiles: ['lifecycle/Migrations.sol']
-}
+  norpc: true,
+  testCommand: 'npm test',
+  compileCommand: 'npm run compile',
+  skipFiles: ['mocks'],
+  providerOptions: {
+    default_balance_ether: '10000000000000000000000000',
+  },
+  mocha: {
+    fgrep: '[skip-on-coverage]',
+    invert: true,
+  },
+};

.soliumignore

@@ -1 +0,0 @@
-node_modules

.soliumrc.json

@@ -1,22 +0,0 @@
-{
-  "custom-rules-filename": null,
-  "rules": {
-    "imports-on-top": true,
-    "variable-declarations": true,
-    "array-declarations": true,
-    "operator-whitespace": true,
-    "lbrace": true,
-    "mixedcase": false,
-    "camelcase": true,
-    "uppercase": true,
-    "no-with": true,
-    "no-empty-blocks": true,
-    "no-unused-vars": true,
-    "double-quotes": true,
-    "blank-lines": true,
-    "indentation": true,
-    "whitespace": true,
-    "deprecated-suicide": true,
-    "pragma-on-top": true
-  }
-}

.travis.yml

@@ -1,20 +0,0 @@
-dist: trusty
-sudo: required
-group: beta
-language: node_js
-node_js:
-  - "6"
-cache:
-  yarn: true
-before_script:
-  - truffle version
-  - yarn list
-script:
-  - yarn test
-notifications:
-  slack:
-    rooms:
-      - secure: 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
-    on_success: change
-    on_failure: always
-    on_pull_requests: false

CODE_OF_CONDUCT.md

@@ -0,0 +1,73 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and maintainers pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, sex characteristics, gender identity and expression,
+level of experience, education, socioeconomic status, nationality, personal
+appearance, race, religion, or sexual identity and orientation.
+
+## Our Standards
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or
+  advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or electronic
+  address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Our Responsibilities
+
+Project maintainers are responsible for clarifying the standards of acceptable
+behavior and are expected to take appropriate and fair corrective action in
+response to any instances of unacceptable behavior.
+
+Project maintainers have the right and responsibility to remove, edit, or
+reject comments, commits, code, wiki edits, issues, and other contributions
+that are not aligned to this Code of Conduct, or to ban temporarily or
+permanently any contributor for other behaviors that they deem inappropriate,
+threatening, offensive, or harmful.
+
+## Scope
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. Examples of
+representing a project or community include using an official project e-mail
+address, posting via an official social media account, or acting as an appointed
+representative at an online or offline event. Representation of a project may be
+further defined and clarified by project maintainers.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported by contacting the project team at contact@openzeppelin.com. All
+complaints will be reviewed and investigated and will result in a response that
+is deemed necessary and appropriate to the circumstances. The project team is
+obligated to maintain confidentiality with regard to the reporter of an incident.
+Further details of specific enforcement policies may be posted separately.
+
+Project maintainers who do not follow or enforce the Code of Conduct in good
+faith may face temporary or permanent repercussions as determined by other
+members of the project's leadership.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4,
+available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html
+
+[homepage]: https://www.contributor-covenant.org

CONTRIBUTING.md

@@ -1,107 +1,36 @@
-Contributing to Zeppelin
-=======
+# Contributing Guidelines
 
-## Design Guidelines
+There are many ways to contribute to OpenZeppelin Contracts.
 
-These are some global design goals in Zeppelin.
+## Troubleshooting
 
-### D0 - Security in Depth
-We strive to provide secure, tested, audited code. To achieve this, we need to match intention with function. Thus, documentation, code clarity, community review and security discussions are fundamental.
+You can help other users in the community to solve their smart contract issues in the [OpenZeppelin Forum].
 
-### D1 - Simple and Modular
-Simpler code means easier audits, and better understanding of what each component does. We look for small files, small contracts, and small functions. If you can separate a contract into two independent functionalities you should probably do it.
+[OpenZeppelin Forum]: https://forum.openzeppelin.com/
 
-### D2 - Naming Matters
+## Opening an issue
 
-We take our time with picking names. Code is going to be written once, and read hundreds of times. Renaming for clarity is encouraged.
+You can [open an issue] to suggest a feature or report a minor bug. For serious bugs please do not open an issue, instead refer to our [security policy] for appropriate steps.
 
-### D3 - Tests
+If you believe your issue may be due to user error and not a problem in the library, consider instead posting a question on the [OpenZeppelin Forum].
 
-Write tests for all your code. We encourage Test Driven Development so we know when our code is right. Even though not all code in the repository is tested at the moment, we aim to test every line of code in the future.
+Before opening an issue, be sure to search through the existing open and closed issues, and consider posting a comment in one of those instead.
 
-### D4 - Check preconditions and post-conditions
+When requesting a new feature, include as many details as you can, especially around the use cases that motivate it. Features are prioritized according to the impact they may have on the ecosystem, so we appreciate information showing that the impact could be high.
 
-A very important way to prevent vulnerabilities is to catch a contract’s inconsistent state as early as possible. This is why we want functions to check pre- and post-conditions for executing its logic. When writing code, ask yourself what you are expecting to be true before and after the function runs, and express it in code.
+[security policy]: https://github.com/OpenZeppelin/openzeppelin-contracts/security
+[open an issue]: https://github.com/OpenZeppelin/openzeppelin-contracts/issues/new/choose
 
-### D5 - Code Consistency
+## Submitting a pull request
 
-Consistency on the way classes are used is paramount to an easier understanding of the library. The codebase should be as unified as possible. Read existing code and get inspired before you write your own. Follow the style guidelines. Don’t hesitate to ask for help on how to best write a specific piece of code.
+If you would like to contribute code or documentation you may do so by forking the repository and submitting a pull request.
 
-### D6 - Regular Audits
-Following good programming practices is a way to reduce the risk of vulnerabilities, but professional code audits are still needed. We will perform regular code audits on major releases, and hire security professionals to provide independent review.
+Any non-trivial code contribution must be first discussed with the maintainers in an issue (see [Opening an issue](#opening-an-issue)). Only very minor changes are accepted without prior discussion.
 
-## Style Guidelines
+Make sure to read and follow the [engineering guidelines](./GUIDELINES.md). Run linter and tests to make sure your pull request is good before submitting it.
 
-The design guidelines have quite a high abstraction level. These style guidelines are more concrete and easier to apply, and also more opinionated.
+Changelog entries should be added to each pull request by using [Changesets](https://github.com/changesets/changesets/).
 
-### General
+When opening the pull request you will be presented with a template and a series of instructions. Read through it carefully and follow all the steps. Expect a review and feedback from the maintainers afterwards.
 
-#### G0 - Default to Solidity's official style guide.
-
-Follow the official Solidity style guide: http://solidity.readthedocs.io/en/latest/style-guide.html
-
-#### G1 - No Magic Constants
-
-Avoid constants in the code as much as possible. Magic strings are also magic constants.
-
-#### G2 - Code that Fails Early
-
-We ask our code to fail as soon as possible when an unexpected input was provided or unexpected state was found.
-
-#### G3 - Internal Amounts Must be Signed Integers and Represent the Smallest Units.
-
-Avoid representation errors by always dealing with weis when handling ether. GUIs can convert to more human-friendly representations. Use Signed Integers (int) to prevent underflow problems.
-
-
-### Testing
-
-#### T1 - Tests Must be Written Elegantly
-
-Style guidelines are not relaxed for tests. Tests are a good way to show how to use the library, and maintaining them is extremely necessary.
-
-Don't write long tests, write helper functions to make them be as short and concise as possible (they should take just a few lines each), and use good variable names.
-
-#### T2 - Tests Must not be Random
-
-Inputs for tests should not be generated randomly. Accounts used to create test contracts are an exception, those can be random. Also, the type and structure of outputs should be checked.
-
-
-### Documentation
-
-TODO
-
-## Pull Request Workflow
-
-Our workflow is based on GitHub's pull requests. We use feature branches, prepended with: `test`, `feature`, `fix`, `refactor`, or `remove` according to the change the branch introduces. Some examples for such branches are:
-```sh
-git checkout -b test/some-module
-git checkout -b feature/some-new-stuff
-git checkout -b fix/some-bug
-git checkout -b remove/some-file
-```
-
-We expect pull requests to be rebased to the master branch before merging:
-```sh
-git remote add zep git@github.com:OpenZeppelin/zeppelin-solidity.git
-git pull --rebase zep master
-```
-
-Note that we require rebasing your branch instead of merging it, for commit readability reasons.
-
-After that, you can push the changes to your fork, by doing:
-```sh
-git push origin your_branch_name
-git push origin feature/some-new-stuff
-git push origin fix/some-bug
-```
-
-Finally go to [github.com/OpenZeppelin/zeppelin-solidity](https://github.com/OpenZeppelin/zeppelin-solidity) in your web browser and issue a new pull request.
-
-Main contributors will review your code and possibly ask for changes before your code is pulled in to the main repository.  We'll check that all tests pass, review the coding style, and check for general code correctness. If everything is OK, we'll merge your pull request and your code will be part of Zeppelin.
-
-If you have any questions feel free to post them to
-[github.com/OpenZeppelin/zeppelin-solidity/issues](https://github.com/OpenZeppelin/zeppelin-solidity/issues).
-
-Finally, if you're looking to collaborate and want to find easy tasks to start, [look at the issues we marked as easy](https://github.com/OpenZeppelin/zeppelin-solidity/labels/easy).
-
-Thanks for your time and code!
+If you're looking for a good place to start, look for issues labelled ["good first issue"](https://github.com/OpenZeppelin/openzeppelin-contracts/labels/good%20first%20issue)!

FUNDING.json

@@ -0,0 +1,7 @@
+{
+  "drips": {
+    "ethereum": {
+      "ownedBy": "0xAeb37910f93486C85A1F8F994b67E8187554d664"
+    }
+  }
+}

GUIDELINES.md

@@ -0,0 +1,148 @@
+# Engineering Guidelines
+
+## Testing
+
+Code must be thoroughly tested with quality unit tests.
+
+We defer to the [Moloch Testing Guide](https://github.com/MolochVentures/moloch/tree/master/test#readme) for specific recommendations, though not all of it is relevant here. Note the introduction:
+
+> Tests should be written, not only to verify correctness of the target code, but to be comprehensively reviewed by other programmers. Therefore, for mission critical Solidity code, the quality of the tests are just as important (if not more so) than the code itself, and should be written with the highest standards of clarity and elegance.
+
+Every addition or change to the code must come with relevant and comprehensive tests.
+
+Refactors should avoid simultaneous changes to tests.
+
+Flaky tests are not acceptable.
+
+The test suite should run automatically for every change in the repository, and in pull requests tests must pass before merging.
+
+The test suite coverage must be kept as close to 100% as possible, enforced in pull requests.
+
+In some cases unit tests may be insufficient and complementary techniques should be used:
+
+1. Property-based tests (aka. fuzzing) for math-heavy code.
+2. Formal verification for state machines.
+
+## Code style
+
+Solidity code should be written in a consistent format enforced by a linter, following the official [Solidity Style Guide](https://docs.soliditylang.org/en/latest/style-guide.html). See below for further [Solidity Conventions](#solidity-conventions).
+
+The code should be simple and straightforward, prioritizing readability and understandability. Consistency and predictability should be maintained across the codebase. In particular, this applies to naming, which should be systematic, clear, and concise.
+
+Sometimes these guidelines may be broken if doing so brings significant efficiency gains, but explanatory comments should be added.
+
+Modularity should be pursued, but not at the cost of the above priorities.
+
+## Documentation
+
+For contributors, project guidelines and processes must be documented publicly.
+
+For users, features must be abundantly documented. Documentation should include answers to common questions, solutions to common problems, and recommendations for critical decisions that the user may face.
+
+All changes to the core codebase (excluding tests, auxiliary scripts, etc.) must be documented in a changelog, except for purely cosmetic or documentation changes.
+
+## Peer review
+
+All changes must be submitted through pull requests and go through peer code review.
+
+The review must be approached by the reviewer in a similar way as if it was an audit of the code in question (but importantly it is not a substitute for and should not be considered an audit).
+
+Reviewers should enforce code and project guidelines.
+
+External contributions must be reviewed separately by multiple maintainers.
+
+## Automation
+
+Automation should be used as much as possible to reduce the possibility of human error and forgetfulness.
+
+Automations that make use of sensitive credentials must use secure secret management, and must be strengthened against attacks such as [those on GitHub Actions worklows](https://github.com/nikitastupin/pwnhub).
+
+Some other examples of automation are:
+
+- Looking for common security vulnerabilities or errors in our code (eg. reentrancy analysis).
+- Keeping dependencies up to date and monitoring for vulnerable dependencies.
+
+## Pull requests
+
+Pull requests are squash-merged to keep the `master` branch history clean. The title of the pull request becomes the commit message, so it should be written in a consistent format:
+
+1) Begin with a capital letter.
+2) Do not end with a period.
+3) Write in the imperative: "Add feature X" and not "Adds feature X" or "Added feature X".
+
+This repository does not follow conventional commits, so do not prefix the title with "fix:" or "feat:".
+
+Work in progress pull requests should be submitted as Drafts and should not be prefixed with "WIP:".
+
+Branch names don't matter, and commit messages within a pull request mostly don't matter either, although they can help the review process.
+
+# Solidity Conventions
+
+In addition to the official Solidity Style Guide we have a number of other conventions that must be followed.
+
+* All state variables should be private.
+
+  Changes to state should be accompanied by events, and in some cases it is not correct to arbitrarily set state. Encapsulating variables as private and only allowing modification via setters enables us to ensure that events and other rules are followed reliably and prevents this kind of user error.
+
+* Internal or private state variables or functions should have an underscore prefix.
+
+  ```solidity
+  contract TestContract {
+      uint256 private _privateVar;
+      uint256 internal _internalVar;
+      function _testInternal() internal { ... }
+      function _testPrivate() private { ... }
+  }
+  ```
+
+* Functions should be declared virtual, with few exceptions listed below. The
+  contract logic should be written considering that these functions may be
+  overridden by developers, e.g. getting a value using an internal getter rather
+  than reading directly from a state variable.
+
+  If function A is an "alias" of function B, i.e. it invokes function B without
+  significant additional logic, then function A should not be virtual so that
+  any user overrides are implemented on B, preventing inconsistencies.
+
+* Events should generally be emitted immediately after the state change that they
+  represent, and should be named in the past tense. Some exceptions may be made for gas
+  efficiency if the result doesn't affect observable ordering of events.
+
+  ```solidity
+  function _burn(address who, uint256 value) internal {
+      super._burn(who, value);
+      emit TokensBurned(who, value);
+  }
+  ```
+
+  Some standards (e.g. ERC-20) use present tense, and in those cases the
+  standard specification is used.
+  
+* Interface names should have a capital I prefix.
+
+  ```solidity
+  interface IERC777 {
+  ```
+
+* Contracts not intended to be used standalone should be marked abstract
+  so they are required to be inherited to other contracts.
+
+  ```solidity
+  abstract contract AccessControl is ..., {
+  ```
+
+* Unchecked arithmetic blocks should contain comments explaining why overflow is guaranteed not to happen. If the reason is immediately apparent from the line above the unchecked block, the comment may be omitted.
+
+* Custom errors should be declared following the [EIP-6093](https://eips.ethereum.org/EIPS/eip-6093) rationale whenever reasonable. Also, consider the following:
+  
+  * The domain prefix should be picked in the following order:
+    1. Use `ERC<number>` if the error is a violation of an ERC specification.
+    2. Use the name of the underlying component where it belongs (eg. `Governor`, `ECDSA`, or `Timelock`).
+
+  * The location of custom errors should be decided in the following order:
+    1. Take the errors from their underlying ERCs if they're already defined.
+    2. Declare the errors in the underlying interface/library if the error makes sense in its context.
+    3. Declare the error in the implementation if the underlying interface/library is not suitable to do so (eg. interface/library already specified in an ERC).
+    4. Declare the error in an extension if the error only happens in such extension or child contracts.
+
+  * Custom error names should not be declared twice along the library to avoid duplicated identifier declarations when inheriting from multiple contracts.

LICENSE

@@ -1,6 +1,6 @@
 The MIT License (MIT)
 
-Copyright (c) 2016 Smart Contract Solutions, Inc.
+Copyright (c) 2016-2024 Zeppelin Group Ltd
 
 Permission is hereby granted, free of charge, to any person obtaining
 a copy of this software and associated documentation files (the

README.md

@@ -1,82 +1,107 @@
-# Zeppelin Solidity
-[![NPM Package](https://img.shields.io/npm/v/zeppelin-solidity.svg?style=flat-square)](https://www.npmjs.org/package/zeppelin-solidity)
-[![Build Status](https://img.shields.io/travis/OpenZeppelin/zeppelin-solidity.svg?branch=master&style=flat-square)](https://travis-ci.org/OpenZeppelin/zeppelin-solidity)
-[![Coverage Status](https://img.shields.io/coveralls/github/OpenZeppelin/zeppelin-solidity/master.svg?style=flat-square)](https://coveralls.io/github/OpenZeppelin/zeppelin-solidity?branch=master)
+# <img src="logo.svg" alt="OpenZeppelin" height="40px">
 
-OpenZeppelin is a library for writing secure [Smart Contracts](https://en.wikipedia.org/wiki/Smart_contract) on Ethereum.
+[![NPM Package](https://img.shields.io/npm/v/@openzeppelin/contracts.svg)](https://www.npmjs.org/package/@openzeppelin/contracts)
+[![Coverage Status](https://codecov.io/gh/OpenZeppelin/openzeppelin-contracts/graph/badge.svg)](https://codecov.io/gh/OpenZeppelin/openzeppelin-contracts)
+[![GitPOAPs](https://public-api.gitpoap.io/v1/repo/OpenZeppelin/openzeppelin-contracts/badge)](https://www.gitpoap.io/gh/OpenZeppelin/openzeppelin-contracts)
+[![Docs](https://img.shields.io/badge/docs-%F0%9F%93%84-yellow)](https://docs.openzeppelin.com/contracts)
+[![Forum](https://img.shields.io/badge/forum-%F0%9F%92%AC-yellow)](https://docs.openzeppelin.com/contracts)
 
-With OpenZeppelin, you can build distributed applications, protocols and organizations:
-- using common contract security patterns (See [Onward with Ethereum Smart Contract Security](https://medium.com/bitcorps-blog/onward-with-ethereum-smart-contract-security-97a827e47702#.y3kvdetbz))
-- in the [Solidity language](http://solidity.readthedocs.io/en/develop/).
+**A library for secure smart contract development.** Build on a solid foundation of community-vetted code.
 
-> NOTE: New to smart contract development? Check our [introductory guide](https://medium.com/zeppelin-blog/the-hitchhikers-guide-to-smart-contracts-in-ethereum-848f08001f05#.cox40d2ut).
+ * Implementations of standards like [ERC20](https://docs.openzeppelin.com/contracts/erc20) and [ERC721](https://docs.openzeppelin.com/contracts/erc721).
+ * Flexible [role-based permissioning](https://docs.openzeppelin.com/contracts/access-control) scheme.
+ * Reusable [Solidity components](https://docs.openzeppelin.com/contracts/utilities) to build custom contracts and complex decentralized systems.
 
-## Getting Started
+:mage: **Not sure how to get started?** Check out [Contracts Wizard](https://wizard.openzeppelin.com/) — an interactive smart contract generator.
 
-OpenZeppelin integrates with [Truffle](https://github.com/ConsenSys/truffle), an Ethereum development environment. Please install Truffle and initialize your project with `truffle init`.
+:building_construction: **Want to scale your decentralized application?** Check out [OpenZeppelin Defender](https://openzeppelin.com/defender) — a mission-critical developer security platform to code, audit, deploy, monitor, and operate with confidence.
 
-```sh
-npm install -g truffle
-mkdir myproject && cd myproject
-truffle init
+> [!IMPORTANT]
+> OpenZeppelin Contracts uses semantic versioning to communicate backwards compatibility of its API and storage layout. For upgradeable contracts, the storage layout of different major versions should be assumed incompatible, for example, it is unsafe to upgrade from 4.9.3 to 5.0.0. Learn more at [Backwards Compatibility](https://docs.openzeppelin.com/contracts/backwards-compatibility).
+
+## Overview
+
+### Installation
+
+#### Hardhat (npm)
+
+```
+$ npm install @openzeppelin/contracts
 ```
 
-To install the OpenZeppelin library, run:
-```sh
-npm init
-npm install zeppelin-solidity
+#### Foundry (git)
 
-# If you are using yarn, add dependency like this -
-yarn add zeppelin-solidity
+> [!WARNING]
+> When installing via git, it is a common error to use the `master` branch. This is a development branch that should be avoided in favor of tagged releases. The release process involves security measures that the `master` branch does not guarantee.
+
+> [!WARNING]
+> Foundry installs the latest version initially, but subsequent `forge update` commands will use the `master` branch.
+
+```
+$ forge install OpenZeppelin/openzeppelin-contracts
 ```
 
-After that, you'll get all the library's contracts in the `node_modules/zeppelin-solidity/contracts` folder. You can use the contracts in the library like so:
+Add `@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/` in `remappings.txt.`
 
-```js
-import 'zeppelin-solidity/contracts/ownership/Ownable.sol';
+### Usage
 
-contract MyContract is Ownable {
-  ...
+Once installed, you can use the contracts in the library by importing them:
+
+```solidity
+pragma solidity ^0.8.20;
+
+import {ERC721} from "@openzeppelin/contracts/token/ERC721/ERC721.sol";
+
+contract MyCollectible is ERC721 {
+    constructor() ERC721("MyCollectible", "MCO") {
+    }
 }
 ```
 
+_If you're new to smart contract development, head to [Developing Smart Contracts](https://docs.openzeppelin.com/learn/developing-smart-contracts) to learn about creating a new project and compiling your contracts._
+
+To keep your system secure, you should **always** use the installed code as-is, and neither copy-paste it from online sources nor modify it yourself. The library is designed so that only the contracts and functions you use are deployed, so you don't need to worry about it needlessly increasing gas costs.
+
+## Learn More
+
+The guides in the [documentation site](https://docs.openzeppelin.com/contracts) will teach about different concepts, and how to use the related contracts that OpenZeppelin Contracts provides:
+
+* [Access Control](https://docs.openzeppelin.com/contracts/access-control): decide who can perform each of the actions on your system.
+* [Tokens](https://docs.openzeppelin.com/contracts/tokens): create tradeable assets or collectives, and distribute them via [Crowdsales](https://docs.openzeppelin.com/contracts/crowdsales).
+* [Utilities](https://docs.openzeppelin.com/contracts/utilities): generic useful tools including non-overflowing math, signature verification, and trustless paying systems.
+
+The [full API](https://docs.openzeppelin.com/contracts/api/token/ERC20) is also thoroughly documented, and serves as a great reference when developing your smart contract application. You can also ask for help or follow Contracts's development in the [community forum](https://forum.openzeppelin.com).
+
+Finally, you may want to take a look at the [guides on our blog](https://blog.openzeppelin.com/), which cover several common use cases and good practices. The following articles provide great background reading, though please note that some of the referenced tools have changed, as the tooling in the ecosystem continues to rapidly evolve.
+
+* [The Hitchhiker’s Guide to Smart Contracts in Ethereum](https://blog.openzeppelin.com/the-hitchhikers-guide-to-smart-contracts-in-ethereum-848f08001f05) will help you get an overview of the various tools available for smart contract development, and help you set up your environment.
+* [A Gentle Introduction to Ethereum Programming, Part 1](https://blog.openzeppelin.com/a-gentle-introduction-to-ethereum-programming-part-1-783cc7796094) provides very useful information on an introductory level, including many basic concepts from the Ethereum platform.
+* For a more in-depth dive, you may read the guide [Designing the Architecture for Your Ethereum Application](https://blog.openzeppelin.com/designing-the-architecture-for-your-ethereum-application-9cec086f8317), which discusses how to better structure your application and its relationship to the real world.
 
 ## Security
-OpenZeppelin is meant to provide secure, tested and community-audited code, but please use common sense when doing anything that deals with real money! We take no responsibility for your implementation decisions and any security problem you might experience.
 
-If you find a security issue, please email [security@openzeppelin.org](mailto:security@openzeppelin.org).
+This project is maintained by [OpenZeppelin](https://openzeppelin.com) with the goal of providing a secure and reliable library of smart contract components for the ecosystem. We address security through risk management in various areas such as engineering and open source best practices, scoping and API design, multi-layered review processes, and incident response preparedness.
 
-## Developer Resources
+The [OpenZeppelin Contracts Security Center](https://contracts.openzeppelin.com/security) contains more details about the secure development process.
 
-Building a distributed application, protocol or organization with OpenZeppelin?
+The security policy is detailed in [`SECURITY.md`](./SECURITY.md) as well, and specifies how you can report security vulnerabilities, which versions will receive security patches, and how to stay informed about them. We run a [bug bounty program on Immunefi](https://immunefi.com/bounty/openzeppelin) to reward the responsible disclosure of vulnerabilities.
 
-- Read documentation: http://zeppelin-solidity.readthedocs.io/en/latest/
+The engineering guidelines we follow to promote project quality can be found in [`GUIDELINES.md`](./GUIDELINES.md).
 
-- Ask for help and follow progress at: https://slack.openzeppelin.org/
+Past audits can be found in [`audits/`](./audits).
 
-Interested in contributing to OpenZeppelin?
+Smart contracts are a nascent technology and carry a high level of technical risk and uncertainty. Although OpenZeppelin is well known for its security audits, using OpenZeppelin Contracts is not a substitute for a security audit.
 
-- Framework proposal and roadmap: https://medium.com/zeppelin-blog/zeppelin-framework-proposal-and-development-roadmap-fdfa9a3a32ab#.iain47pak
-- Issue tracker: https://github.com/OpenZeppelin/zeppelin-solidity/issues
-- Contribution guidelines: https://github.com/OpenZeppelin/zeppelin-solidity/blob/master/CONTRIBUTING.md
+OpenZeppelin Contracts is made available under the MIT License, which disclaims all warranties in relation to the project and which limits the liability of those that contribute and maintain the project, including OpenZeppelin. As set out further in the Terms, you acknowledge that you are solely responsible for any use of OpenZeppelin Contracts and you assume all risks associated with any such use.
 
-## Collaborating organizations and audits by OpenZeppelin
-- [Golem](https://golem.network/)
-- [Mediachain](http://www.mediachain.io/)
-- [Truffle](http://truffleframework.com/)
-- [Firstblood](http://firstblood.io/)
-- [Rootstock](http://www.rsk.co/)
-- [Consensys](https://consensys.net/)
-- [DigixGlobal](https://www.dgx.io/)
-- [Coinfund](https://coinfund.io/)
-- [DemocracyEarth](http://democracy.earth/)
-- [Signatura](https://signatura.co/)
-- [Ether.camp](http://www.ether.camp/)
-- [Aragon](https://aragon.one/)
-- [Wings](https://wings.ai/)
-
-among others...
+## Contribute
 
+OpenZeppelin Contracts exists thanks to its contributors. There are many ways you can participate and help build high quality software. Check out the [contribution guide](CONTRIBUTING.md)!
 
 ## License
-Code released under the [MIT License](https://github.com/OpenZeppelin/zeppelin-solidity/blob/master/LICENSE).
+
+OpenZeppelin Contracts is released under the [MIT License](LICENSE).
+
+## Legal
+
+Your use of this Project is governed by the terms found at www.openzeppelin.com/tos (the "Terms").

RELEASING.md

@@ -0,0 +1,45 @@
+# Releasing
+
+OpenZeppelin Contracts uses a fully automated release process that takes care of compiling, packaging, and publishing the library, all of which is carried out in a clean CI environment (GitHub Actions), implemented in the ([`release-cycle`](.github/workflows/release-cycle.yml)) workflow. This helps to reduce the potential for human error and inconsistencies, and ensures that the release process is ongoing and reliable.
+
+## Changesets
+
+[Changesets](https://github.com/changesets/changesets/) is used as part of our release process for `CHANGELOG.md` management. Each change that is relevant for the codebase is expected to include a changeset.
+
+## Branching model
+
+The release cycle happens on release branches called `release-vX.Y`. Each of these branches starts as a release candidate (rc) and is eventually promoted to final.
+
+A release branch can be updated with cherry-picked patches from `master`, or may sometimes be committed to directly in the case of old releases. These commits will lead to a new release candidate or a patch increment depending on the state of the release branch.
+
+```mermaid
+  %%{init: {'gitGraph': {'mainBranchName': 'master'}} }%%
+  gitGraph
+    commit id: "Feature A"
+    commit id: "Feature B"
+    branch release-vX.Y
+    commit id: "Start release"
+    commit id: "Release vX.Y.0-rc.0"
+
+    checkout master
+    commit id: "Feature C"
+    commit id: "Fix A"
+
+    checkout release-vX.Y
+    cherry-pick id: "Fix A" tag: ""
+    commit id: "Release vX.Y.0-rc.1"
+    commit id: "Release vX.Y.0"
+
+    checkout master
+    merge release-vX.Y
+    commit id: "Feature D"
+    commit id: "Patch B"
+
+    checkout release-vX.Y
+    cherry-pick id: "Patch B" tag: ""
+    commit id: "Release vX.Y.1"
+    
+    checkout master
+    merge release-vX.Y
+    commit id: "Feature E"
+```

SECURITY.md

@@ -0,0 +1,43 @@
+# Security Policy
+
+Security vulnerabilities should be disclosed to the project maintainers through [Immunefi], or alternatively by email to security@openzeppelin.com.
+
+[Immunefi]: https://immunefi.com/bounty/openzeppelin
+
+## Bug Bounty
+
+Responsible disclosure of security vulnerabilities is rewarded through a bug bounty program on [Immunefi].
+
+There is a bonus reward for issues introduced in release candidates that are reported before making it into a stable release. Learn more about release candidates at [`RELEASING.md`](./RELEASING.md).
+
+## Security Patches
+
+Security vulnerabilities will be patched as soon as responsibly possible, and published as an advisory on this repository (see [advisories]) and on the affected npm packages.
+
+[advisories]: https://github.com/OpenZeppelin/openzeppelin-contracts/security/advisories
+
+Projects that build on OpenZeppelin Contracts are encouraged to clearly state, in their source code and websites, how to be contacted about security issues in the event that a direct notification is considered necessary. We recommend including it in the NatSpec for the contract as `/// @custom:security-contact security@example.com`.
+
+Additionally, we recommend installing the library through npm and setting up vulnerability alerts such as [Dependabot].
+
+[Dependabot]: https://docs.github.com/en/code-security/supply-chain-security/understanding-your-software-supply-chain/about-supply-chain-security#what-is-dependabot
+
+### Supported Versions
+
+Security patches will be released for the latest minor of a given major release. For example, if an issue is found in versions >=4.6.0 and the latest is 4.8.0, the patch will be released only in version 4.8.1.
+
+Only critical severity bug fixes will be backported to past major releases.
+
+| Version | Critical security fixes | Other security fixes |
+| ------- | ----------------------- | -------------------- |
+| 5.x     | :white_check_mark:      | :white_check_mark:   |
+| 4.9     | :white_check_mark:      | :x:                  |
+| 3.4     | :white_check_mark:      | :x:                  |
+| 2.5     | :x:                     | :x:                  |
+| < 2.0   | :x:                     | :x:                  |
+
+Note as well that the Solidity language itself only guarantees security updates for the latest release.
+
+## Legal
+
+Smart contracts are a nascent technology and carry a high level of technical risk and uncertainty. OpenZeppelin Contracts is made available under the MIT License, which disclaims all warranties in relation to the project and which limits the liability of those that contribute and maintain the project, including OpenZeppelin. Your use of the project is also governed by the terms found at www.openzeppelin.com/tos (the "Terms"). As set out in the Terms, you are solely responsible for any use of OpenZeppelin Contracts and you assume all risks associated with any such use. This Security Policy in no way evidences or represents an on-going duty by any contributor, including OpenZeppelin, to correct any flaws or alert you to all or any of the potential risks of utilizing the project.

audits/2017-03.md

@@ -1,5 +1,7 @@
 # OpenZeppelin Audit
 
+NOTE ON 2021-07-19: This report makes reference to Zeppelin, OpenZeppelin, OpenZeppelin Contracts, the OpenZeppelin team, and OpenZeppelin library. Many of these things have since been renamed and know that this audit applies to what is currently called the OpenZeppelin Contracts which are maintained by the OpenZeppelin Contracts Community.
+
 March, 2017
 Authored by Dennis Peterson and Peter Vessenes
 
@@ -131,7 +133,7 @@ I presume that the goal of this contract is to allow and annotate a migration to
 
 We like these pauses! Note that these allow significant griefing potential by owners, and that this might not be obvious to participants in smart contracts using the OpenZeppelin framework. We would recommend that additional sample logic be added to for instance the TokenContract showing safer use of the pause and resume functions. In particular, we would recommend a timelock after which anyone could unpause the contract.
 
-The modifers use the pattern `if(bool){_;}`. This is fine for functions that return false upon failure, but could be problematic for functions expected to throw upon failure. See our comments above on standardizing on `throw` or `return(false)`.
+The modifiers use the pattern `if(bool){_;}`. This is fine for functions that return false upon failure, but could be problematic for functions expected to throw upon failure. See our comments above on standardizing on `throw` or `return(false)`.
 
 ## Ownership
 

audits/README.md

@@ -0,0 +1,17 @@
+# Audits
+
+| Date         | Version | Commit    | Auditor      | Scope                | Links                                                       |
+| ------------ | ------- | --------- | ------------ | -------------------- | ----------------------------------------------------------- |
+| October 2023 | v5.0.0  | `b5a3e69` | OpenZeppelin | v5.0 Changes         | [🔗](./2023-10-v5.0.pdf)                                    |
+| May 2023     | v4.9.0  | `91df66c` | OpenZeppelin | v4.9 Changes         | [🔗](./2023-05-v4.9.pdf)                                    |
+| October 2022 | v4.8.0  | `14f98db` | OpenZeppelin | ERC4626, Checkpoints | [🔗](./2022-10-ERC4626.pdf) [🔗](./2022-10-Checkpoints.pdf) |
+| October 2018 | v2.0.0  | `dac5bcc` | LevelK       | Everything           | [🔗](./2018-10.pdf)                                         |
+| March 2017   | v1.0.4  | `9c5975a` | New Alchemy  | Everything           | [🔗](./2017-03.md)                                          |
+
+# Formal Verification
+
+| Date         | Version | Commit    | Tool    | Scope                                                                                                                            | Links                                |
+| ------------ | ------- | --------- | ------- | -------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------ |
+| May 2022     | v4.7.0  | `109778c` | Certora | Initializable, GovernorPreventLateQuorum, ERC1155Burnable, ERC1155Pausable, ERC1155Supply, ERC1155Holder, ERC1155Receiver        | [🔗](../certora/reports/2022-05.pdf) |
+| March 2022   | v4.4.0  | `4088540` | Certora | ERC20Votes, ERC20FlashMint, ERC20Wrapper, TimelockController, ERC721Votes, Votes, AccessControl, ERC1155                         | [🔗](../certora/reports/2022-03.pdf) |
+| October 2021 | v4.4.0  | `4088540` | Certora | Governor, GovernorCountingSimple, GovernorProposalThreshold, GovernorTimelockControl, GovernorVotes, GovernorVotesQuorumFraction | [🔗](../certora/reports/2021-10.pdf) |

certora/.gitignore

@@ -0,0 +1 @@
+patched

certora/Makefile

@@ -0,0 +1,54 @@
+default: help
+
+SRC   := ../contracts
+DST   := patched
+DIFF  := diff
+SRCS  := $(shell find $(SRC) -type f)
+DSTS  := $(shell find $(DST) -type f)
+DIFFS := $(shell find $(DIFF) -type f)
+
+###############################################################################
+# Apply all patches in the $DIFF folder to the $DST folder
+apply: $(DST) $(patsubst $(DIFF)/%.patch,$(DST)/%,$(subst _,/,$(DIFFS)))
+
+# Reset the $DST folder
+$(DST): FORCE
+	@rm -rf $@
+	@cp -r $(SRC) $@
+
+# Update a solidity file in the $DST directory using the corresponding patch
+$(DST)/%.sol: FORCE | $(DST)
+	@echo Applying patch to $@
+	@patch -p0 -d $(DST) < $(patsubst $(DST)_%,$(DIFF)/%.patch,$(subst /,_,$@))
+
+###############################################################################
+# Record all difference between $SRC and $DST in patches
+record: $(DIFF) $(patsubst %,$(DIFF)/%.patch,$(subst /,_,$(subst $(SRC)/,,$(SRCS)) $(subst $(DST)/,,$(DSTS))))
+
+# Create the $DIFF folder
+$(DIFF): FORCE
+	@rm -rf $@
+	@mkdir $@
+
+# Create the patch file by comparing the source and the destination
+$(DIFF)/%.patch: FORCE | $(DIFF)
+	@echo Generating patch $@
+	@diff -ruN \
+		$(patsubst $(DIFF)/%.patch,$(SRC)/%,$(subst _,/,$@)) \
+		$(patsubst $(DIFF)/%.patch,$(DST)/%,$(subst _,/,$@)) \
+		| sed 's+$(SRC)/++g' \
+		| sed 's+$(DST)/++g' \
+		> $@
+	@[ -s $@ ] || rm $@
+
+###############################################################################
+help:
+	@echo "usage:"
+	@echo "  make apply:  create $(DST) directory by applying the patches to $(SRC)"
+	@echo "  make record: record the patches capturing the differences between $(SRC) and $(DST)"
+	@echo "  make clean:  remove all generated files (those ignored by git)"
+
+clean:
+	git clean -fdX
+
+FORCE: ;

certora/README.md

@@ -0,0 +1,60 @@
+# Running the certora verification tool
+
+These instructions detail the process for running Certora Verification Tool on OpenZeppelin Contracts.
+
+Documentation for CVT and the specification language are available [here](https://certora.atlassian.net/wiki/spaces/CPD/overview).
+
+## Prerequisites
+
+Follow the [Certora installation guide](https://docs.certora.com/en/latest/docs/user-guide/getting-started/install.html) in order to get the Certora Prover Package and the `solc` executable folder in your path.
+
+> **Note**
+> An API Key is required for local testing. Although the prover will run on a Github Actions' CI environment on selected Pull Requests.
+
+## Running the verification
+
+The Certora Verification Tool proves specs for contracts, which are defined by the `./specs.json` file along with their pre-configured options.
+
+The verification script `./run.js` is used to submit verification jobs to the Certora Verification service.
+
+You can run it from the root of the repository with the following command:
+
+```bash
+node certora/run.js [[CONTRACT_NAME:]SPEC_NAME] [OPTIONS...]
+```
+
+Where:
+
+- `CONTRACT_NAME` matches the `contract` key in the `./spec.json` file and may be empty. It will run all matching contracts if not provided.
+- `SPEC_NAME` refers to a `spec` key from the `./specs.json` file. It will run every spec if not provided.
+- `OPTIONS` extend the [Certora Prover CLI options](https://docs.certora.com/en/latest/docs/prover/cli/options.html#certora-prover-cli-options) and will respect the preconfigured options in the `specs.json` file.
+
+> **Note**
+> A single spec may be configured to run for multiple contracts, whereas a single contract may run multiple specs.
+
+Example usage:
+
+```bash
+node certora/run.js AccessControl # Run the AccessControl spec against every contract implementing it
+```
+
+## Adapting to changes in the contracts
+
+Some of our rules require the code to be simplified in various ways. Our primary tool for performing these simplifications is to run verification on a contract that extends the original contracts and overrides some of the methods. These "harness" contracts can be found in the `certora/harness` directory.
+
+This pattern does require some modifications to the original code: some methods need to be made virtual or public, for example. These changes are handled by applying a patch
+to the code before verification by running:
+
+```bash
+make -C certora apply
+```
+
+Before running the `certora/run.js` script, it's required to apply the corresponding patches to the `contracts` directory, placing the output in the `certora/patched` directory. Then, the contracts are verified by running the verification for the `certora/patched` directory.
+
+If the original contracts change, it is possible to create a conflict with the patch. In this case, the verify scripts will report an error message and output rejected changes in the `patched` directory. After merging the changes, run `make record` in the `certora` directory; this will regenerate the patch file, which can then be checked into git.
+
+For more information about the `make` scripts available, run:
+
+```bash
+make -C certora help
+```

certora/diff/access_manager_AccessManager.sol.patch

@@ -0,0 +1,97 @@
+--- access/manager/AccessManager.sol	2023-10-05 12:17:09.694051809 -0300
++++ access/manager/AccessManager.sol	2023-10-05 12:26:18.498688718 -0300
+@@ -6,7 +6,6 @@
+ import {IAccessManaged} from "./IAccessManaged.sol";
+ import {Address} from "../../utils/Address.sol";
+ import {Context} from "../../utils/Context.sol";
+-import {Multicall} from "../../utils/Multicall.sol";
+ import {Math} from "../../utils/math/Math.sol";
+ import {Time} from "../../utils/types/Time.sol";
+ 
+@@ -57,7 +56,8 @@
+  * mindful of the danger associated with functions such as {{Ownable-renounceOwnership}} or
+  * {{AccessControl-renounceRole}}.
+  */
+-contract AccessManager is Context, Multicall, IAccessManager {
++// NOTE: The FV version of this contract doesn't include Multicall because CVL HAVOCs on any `delegatecall`.
++contract AccessManager is Context, IAccessManager {
+     using Time for *;
+ 
+     // Structure that stores the details for a target contract.
+@@ -105,7 +105,7 @@
+ 
+     // Used to identify operations that are currently being executed via {execute}.
+     // This should be transient storage when supported by the EVM.
+-    bytes32 private _executionId;
++    bytes32 internal _executionId; // private → internal for FV
+ 
+     /**
+      * @dev Check that the caller is authorized to perform the operation, following the restrictions encoded in
+@@ -253,6 +253,11 @@
+         _setGrantDelay(roleId, newDelay);
+     }
+ 
++    // Exposed for FV
++    function _getTargetAdminDelayFull(address target) internal view virtual returns (uint32, uint32, uint48) {
++        return _targets[target].adminDelay.getFull();
++    }
++
+     /**
+      * @dev Internal version of {grantRole} without access control. Returns true if the role was newly granted.
+      *
+@@ -287,6 +292,11 @@
+         return newMember;
+     }
+ 
++    // Exposed for FV
++    function _getRoleGrantDelayFull(uint64 roleId) internal view virtual returns (uint32, uint32, uint48) {
++        return _roles[roleId].grantDelay.getFull();
++    }
++
+     /**
+      * @dev Internal version of {revokeRole} without access control. This logic is also used by {renounceRole}.
+      * Returns true if the role was previously granted.
+@@ -586,7 +596,7 @@
+     /**
+      * @dev Check if the current call is authorized according to admin logic.
+      */
+-    function _checkAuthorized() private {
++    function _checkAuthorized() internal virtual { // private → internal virtual for FV
+         address caller = _msgSender();
+         (bool immediate, uint32 delay) = _canCallSelf(caller, _msgData());
+         if (!immediate) {
+@@ -609,7 +619,7 @@
+      */
+     function _getAdminRestrictions(
+         bytes calldata data
+-    ) private view returns (bool adminRestricted, uint64 roleAdminId, uint32 executionDelay) {
++    ) internal view returns (bool adminRestricted, uint64 roleAdminId, uint32 executionDelay) { // private → internal for FV
+         if (data.length < 4) {
+             return (false, 0, 0);
+         }
+@@ -662,7 +672,7 @@
+         address caller,
+         address target,
+         bytes calldata data
+-    ) private view returns (bool immediate, uint32 delay) {
++    ) internal view returns (bool immediate, uint32 delay) { // private → internal for FV
+         if (target == address(this)) {
+             return _canCallSelf(caller, data);
+         } else {
+@@ -716,14 +726,14 @@
+     /**
+      * @dev Extracts the selector from calldata. Panics if data is not at least 4 bytes
+      */
+-    function _checkSelector(bytes calldata data) private pure returns (bytes4) {
++    function _checkSelector(bytes calldata data) internal pure returns (bytes4) { // private → internal for FV
+         return bytes4(data[0:4]);
+     }
+ 
+     /**
+      * @dev Hashing function for execute protection
+      */
+-    function _hashExecutionId(address target, bytes4 selector) private pure returns (bytes32) {
++    function _hashExecutionId(address target, bytes4 selector) internal pure returns (bytes32) { // private → internal for FV
+         return keccak256(abi.encode(target, selector));
+     }
+ }

certora/harnesses/AccessControlDefaultAdminRulesHarness.sol

@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: MIT
+pragma solidity ^0.8.20;
+
+import {AccessControlDefaultAdminRules} from "../patched/access/extensions/AccessControlDefaultAdminRules.sol";
+
+contract AccessControlDefaultAdminRulesHarness is AccessControlDefaultAdminRules {
+    uint48 private _delayIncreaseWait;
+
+    constructor(
+        uint48 initialDelay,
+        address initialDefaultAdmin,
+        uint48 delayIncreaseWait
+    ) AccessControlDefaultAdminRules(initialDelay, initialDefaultAdmin) {
+        _delayIncreaseWait = delayIncreaseWait;
+    }
+
+    // FV
+    function pendingDefaultAdmin_() external view returns (address) {
+        (address newAdmin, ) = pendingDefaultAdmin();
+        return newAdmin;
+    }
+
+    function pendingDefaultAdminSchedule_() external view returns (uint48) {
+        (, uint48 schedule) = pendingDefaultAdmin();
+        return schedule;
+    }
+
+    function pendingDelay_() external view returns (uint48) {
+        (uint48 newDelay, ) = pendingDefaultAdminDelay();
+        return newDelay;
+    }
+
+    function pendingDelaySchedule_() external view returns (uint48) {
+        (, uint48 schedule) = pendingDefaultAdminDelay();
+        return schedule;
+    }
+
+    function delayChangeWait_(uint48 newDelay) external view returns (uint48) {
+        return _delayChangeWait(newDelay);
+    }
+
+    // Overrides
+    function defaultAdminDelayIncreaseWait() public view override returns (uint48) {
+        return _delayIncreaseWait;
+    }
+}

certora/harnesses/AccessControlHarness.sol

@@ -0,0 +1,6 @@
+// SPDX-License-Identifier: MIT
+pragma solidity ^0.8.20;
+
+import {AccessControl} from "../patched/access/AccessControl.sol";
+
+contract AccessControlHarness is AccessControl {}

certora/harnesses/AccessManagedHarness.sol

@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: MIT
+
+pragma solidity ^0.8.20;
+
+import "../patched/access/manager/IAccessManager.sol";
+import "../patched/access/manager/AccessManaged.sol";
+
+contract AccessManagedHarness is AccessManaged {
+    bytes internal SOME_FUNCTION_CALLDATA = abi.encodeCall(this.someFunction, ());
+
+    constructor(address initialAuthority) AccessManaged(initialAuthority) {}
+
+    function someFunction() public restricted() {
+        // Sanity for FV: the msg.data when calling this function should be the same as the data used when checking
+        // the schedule. This is a reformulation of `msg.data == SOME_FUNCTION_CALLDATA` that focuses on the operation
+        // hash for this call.
+        require(
+            IAccessManager(authority()).hashOperation(_msgSender(), address(this), msg.data)
+            ==
+            IAccessManager(authority()).hashOperation(_msgSender(), address(this), SOME_FUNCTION_CALLDATA)
+        );
+    }
+
+    function authority_canCall_immediate(address caller) public view returns (bool result) {
+        (result,) = AuthorityUtils.canCallWithDelay(authority(), caller, address(this), this.someFunction.selector);
+    }
+
+    function authority_canCall_delay(address caller) public view returns (uint32 result) {
+        (,result) = AuthorityUtils.canCallWithDelay(authority(), caller, address(this), this.someFunction.selector);
+    }
+
+    function authority_getSchedule(address caller) public view returns (uint48) {
+        IAccessManager manager = IAccessManager(authority());
+        return manager.getSchedule(manager.hashOperation(caller, address(this), SOME_FUNCTION_CALLDATA));
+    }
+}

certora/harnesses/AccessManagerHarness.sol

@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: MIT
+
+pragma solidity ^0.8.20;
+
+import "../patched/access/manager/AccessManager.sol";
+
+contract AccessManagerHarness is AccessManager {
+    // override with a storage slot that can basically take any value.
+    uint32 private _minSetback;
+
+    constructor(address initialAdmin) AccessManager(initialAdmin) {}
+
+    // FV
+    function minSetback() public view override returns (uint32) {
+        return _minSetback;
+    }
+
+    function canCall_immediate(address caller, address target, bytes4 selector) external view returns (bool result) {
+        (result,) = canCall(caller, target, selector);
+    }
+
+    function canCall_delay(address caller, address target, bytes4 selector) external view returns (uint32 result) {
+        (,result) = canCall(caller, target, selector);
+    }
+
+    function canCallExtended(address caller, address target, bytes calldata data) external view returns (bool, uint32) {
+        return _canCallExtended(caller, target, data);
+    }
+
+    function canCallExtended_immediate(address caller, address target, bytes calldata data) external view returns (bool result) {
+        (result,) = _canCallExtended(caller, target, data);
+    }
+
+    function canCallExtended_delay(address caller, address target, bytes calldata data) external view returns (uint32 result) {
+        (,result) = _canCallExtended(caller, target, data);
+    }
+
+    function getAdminRestrictions_restricted(bytes calldata data) external view returns (bool result) {
+        (result,,) = _getAdminRestrictions(data);
+    }
+
+    function getAdminRestrictions_roleAdminId(bytes calldata data) external view returns (uint64 result) {
+        (,result,) = _getAdminRestrictions(data);
+    }
+
+    function getAdminRestrictions_executionDelay(bytes calldata data) external view returns (uint32 result) {
+        (,,result) = _getAdminRestrictions(data);
+    }
+
+    function hasRole_isMember(uint64 roleId, address account) external view returns (bool result) {
+        (result,) = hasRole(roleId, account);
+    }
+
+    function hasRole_executionDelay(uint64 roleId, address account) external view returns (uint32 result) {
+        (,result) = hasRole(roleId, account);
+    }
+
+    function getAccess_since(uint64 roleId, address account) external view returns (uint48 result) {
+        (result,,,) = getAccess(roleId, account);
+    }
+
+    function getAccess_currentDelay(uint64 roleId, address account) external view returns (uint32 result) {
+        (,result,,) = getAccess(roleId, account);
+    }
+
+    function getAccess_pendingDelay(uint64 roleId, address account) external view returns (uint32 result) {
+        (,,result,) = getAccess(roleId, account);
+    }
+
+    function getAccess_effect(uint64 roleId, address account) external view returns (uint48 result) {
+        (,,,result) = getAccess(roleId, account);
+    }
+
+    function getTargetAdminDelay_after(address target) public view virtual returns (uint32 result) {
+        (,result,) = _getTargetAdminDelayFull(target);
+    }
+
+    function getTargetAdminDelay_effect(address target) public view virtual returns (uint48 result) {
+        (,,result) = _getTargetAdminDelayFull(target);
+    }
+
+    function getRoleGrantDelay_after(uint64 roleId) public view virtual returns (uint32 result) {
+        (,result,) = _getRoleGrantDelayFull(roleId);
+    }
+
+    function getRoleGrantDelay_effect(uint64 roleId) public view virtual returns (uint48 result) {
+        (,,result) = _getRoleGrantDelayFull(roleId);
+    }
+
+    function hashExecutionId(address target, bytes4 selector) external pure returns (bytes32) {
+        return _hashExecutionId(target, selector);
+    }
+
+    function executionId() external view returns (bytes32) {
+        return _executionId;
+    }
+
+    // Pad with zeros (and don't revert) if data is too short.
+    function getSelector(bytes calldata data) external pure returns (bytes4) {
+        return bytes4(data);
+    }
+
+    function getFirstArgumentAsAddress(bytes calldata data) external pure returns (address) {
+        return abi.decode(data[0x04:0x24], (address));
+    }
+
+    function getFirstArgumentAsUint64(bytes calldata data) external pure returns (uint64) {
+        return abi.decode(data[0x04:0x24], (uint64));
+    }
+
+    function _checkAuthorized() internal override {
+        // We need this hack otherwise certora will assume _checkSelector(_msgData()) can return anything :/
+        require(msg.sig == _checkSelector(_msgData()));
+        super._checkAuthorized();
+    }
+}

certora/harnesses/DoubleEndedQueueHarness.sol

@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: MIT
+pragma solidity ^0.8.20;
+
+import {DoubleEndedQueue} from "../patched/utils/structs/DoubleEndedQueue.sol";
+
+contract DoubleEndedQueueHarness {
+    using DoubleEndedQueue for DoubleEndedQueue.Bytes32Deque;
+
+    DoubleEndedQueue.Bytes32Deque private _deque;
+
+    function pushFront(bytes32 value) external {
+        _deque.pushFront(value);
+    }
+
+    function pushBack(bytes32 value) external {
+        _deque.pushBack(value);
+    }
+
+    function popFront() external returns (bytes32 value) {
+        return _deque.popFront();
+    }
+
+    function popBack() external returns (bytes32 value) {
+        return _deque.popBack();
+    }
+
+    function clear() external {
+        _deque.clear();
+    }
+
+    function begin() external view returns (uint128) {
+        return _deque._begin;
+    }
+
+    function end() external view returns (uint128) {
+        return _deque._end;
+    }
+
+    function length() external view returns (uint256) {
+        return _deque.length();
+    }
+
+    function empty() external view returns (bool) {
+        return _deque.empty();
+    }
+
+    function front() external view returns (bytes32 value) {
+        return _deque.front();
+    }
+
+    function back() external view returns (bytes32 value) {
+        return _deque.back();
+    }
+
+    function at_(uint256 index) external view returns (bytes32 value) {
+        return _deque.at(index);
+    }
+}

certora/harnesses/ERC20FlashMintHarness.sol

@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: MIT
+
+pragma solidity ^0.8.20;
+
+import "../patched/token/ERC20/ERC20.sol";
+import "../patched/token/ERC20/extensions/ERC20Permit.sol";
+import "../patched/token/ERC20/extensions/ERC20FlashMint.sol";
+
+contract ERC20FlashMintHarness is ERC20, ERC20Permit, ERC20FlashMint {
+    uint256 someFee;
+    address someFeeReceiver;
+
+    constructor(string memory name, string memory symbol) ERC20(name, symbol) ERC20Permit(name) {}
+
+    function mint(address account, uint256 amount) external {
+        _mint(account, amount);
+    }
+
+    function burn(address account, uint256 amount) external {
+        _burn(account, amount);
+    }
+
+    // public accessor
+    function flashFeeReceiver() public view returns (address) {
+        return someFeeReceiver;
+    }
+
+    // internal hook
+    function _flashFee(address, uint256) internal view override returns (uint256) {
+        return someFee;
+    }
+
+    function _flashFeeReceiver() internal view override returns (address) {
+        return someFeeReceiver;
+    }
+}

certora/harnesses/ERC20PermitHarness.sol

@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: MIT
+pragma solidity ^0.8.20;
+
+import {ERC20Permit, ERC20} from "../patched/token/ERC20/extensions/ERC20Permit.sol";
+
+contract ERC20PermitHarness is ERC20Permit {
+    constructor(string memory name, string memory symbol) ERC20(name, symbol) ERC20Permit(name) {}
+
+    function mint(address account, uint256 amount) external {
+        _mint(account, amount);
+    }
+
+    function burn(address account, uint256 amount) external {
+        _burn(account, amount);
+    }
+}

certora/harnesses/ERC20WrapperHarness.sol

@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: MIT
+
+pragma solidity ^0.8.20;
+
+import {ERC20Permit} from "../patched/token/ERC20/extensions/ERC20Permit.sol";
+import {ERC20Wrapper, IERC20, ERC20} from "../patched/token/ERC20/extensions/ERC20Wrapper.sol";
+
+contract ERC20WrapperHarness is ERC20Permit, ERC20Wrapper {
+    constructor(
+        IERC20 _underlying,
+        string memory _name,
+        string memory _symbol
+    ) ERC20(_name, _symbol) ERC20Permit(_name) ERC20Wrapper(_underlying) {}
+
+    function underlyingTotalSupply() public view returns (uint256) {
+        return underlying().totalSupply();
+    }
+
+    function underlyingBalanceOf(address account) public view returns (uint256) {
+        return underlying().balanceOf(account);
+    }
+
+    function underlyingAllowanceToThis(address account) public view returns (uint256) {
+        return underlying().allowance(account, address(this));
+    }
+
+    function recover(address account) public returns (uint256) {
+        return _recover(account);
+    }
+
+    function decimals() public view override(ERC20Wrapper, ERC20) returns (uint8) {
+        return super.decimals();
+    }
+}